Keypad Lock; Busy Channel Lock-Out (Bcl); Monitor - Uniden UH076DLX Owner's Manual

Operation
secs after the last key is pressed.

Keypad Lock

To prevent accidental entries, you can lock the keypad.
Press and hold the
icon appears.
To unlock the keypad, press and hold the
disappears.
When the Key Lock is active, a warning beep will be heard if
you attempt to press keys. (except for the PTT button).
NOTE

Busy Channel Lock-out (BCL)

This feature prevents accidental transmission on a busy channel.
This is recommended on channels where CTCSS is being used. If you
hear sound from the speaker (unless it's in Monitor Mode -- see below),
the BCL feature will prevent you from transmitting.
To activate BCL
bcl
Press and hold
To De-activate BCL
bcl
Press and hold

Monitor

This feature enables users to listen in for weak signals on the current
channel at the press of a button.
To use monitor
• For brief listening, press
• For continuous listening. Press and hold
beep will be heard and the receiver circuit will stay open letting in both
the noise & weak signals.
• Display shows MON and BUSY icons.
• To return to normal receive mode press
UNIDEN UH076DLX
lock
button until it beeps to activate Key Lock.
for 1.5 secs. until BCL appears on display.
for 1.5 secs. until BCL disappears from the display.
mon
.
22
lock
button again.
mon
for 2 sec. A two tone
mon
.
Handheld UHF-CB Transceiver
icon