Advertisement
Quick Links
User Manual ► FEISOL CT-3301, CT-3401 and CT-3402
A.
Mount and Center Column Installation
For exchanging mounts (flat Ball-Head mount / Center Column mount / Leveling Base) on
the tripod, unscrew the three counter-sunk screws on top of the mainframe using the
included Alan key (see picture), insert desired mount and re-tighten the three screws. To
avoid possible damage to the screws or tripod, please do not over-tighten them.
B. Leg Tension Adjustment
Insert the two hexagonal wrenches (included) into the two screws at the base of the leg
(see picture) and tighten or loosen them to the desired friction, by turning the wrenches in
opposite directions.
WWW.FEISOL.NET
© FEISOL INC, USA
Page 1 of 4
Advertisement
Related Manuals for feisol CT-3301
Summary of Contents for feisol CT-3301
- Page 1 User Manual ► FEISOL CT-3301, CT-3401 and CT-3402 Mount and Center Column Installation For exchanging mounts (flat Ball-Head mount / Center Column mount / Leveling Base) on the tripod, unscrew the three counter-sunk screws on top of the mainframe using the included Alan key (see picture), insert desired mount and re-tighten the three screws.
- Page 2 To increase tripod stability during windy conditions a Weight Hook is included, allowing for heavier objects (backpack, weight bags) to be attached to the tripod. The hook can be screwed onto the bottom plate of the pre-installed Center Column (see picture). WWW.FEISOL.NET © FEISOL INC, USA Page 2 of 4...
- Page 3 When using a Center Column, making sure that the Center Column is securely locked, screw the Ball-Head onto the mounting screw by turning the Ball-Head clockwise (see picture). Please do not over-tighten. WWW.FEISOL.NET © FEISOL INC, USA Page 3 of 4...
- Page 4 Please note that damage to your tripod’s Carbon Tubes or Aluminum parts can occur when they dropped, squeezed, overloaded, or forced downward (eg. into sand dunes or snowbanks). Please exercise care to avoid such conditions. WWW.FEISOL.NET © FEISOL INC, USA Page 4 of 4...