Advertisement
User Manual ► FEISOL Video Head VH-40 / VH-60 User Manual
Assembly
The handle of the VH-40/VH-60 Video Head comes unassembled for shipping. After
unpacking the Video Head, unscrew and remove the Quick Release Knob, then remove the
black metal tube connecting the clamp and the screw. Two hex screws can now be
accessed underneath (see picture below).
Place the handle inside the handle base clamp (Note: the handle can be inserted in both
directions for right-handed or left-handed operation) and use the included hex key to tighten
the hex screws (and lock the handle at the desired angle). Finally, re-attach the black tube
and the Locking Knob to complete the handle assembly.
WWW.FEISOL.NET
© FEISOL INC, USA
Page 1 of 3
Advertisement
Table of Contents
Related Manuals for feisol VH-40
Summary of Contents for feisol VH-40
- Page 1 User Manual ► FEISOL Video Head VH-40 / VH-60 User Manual Assembly The handle of the VH-40/VH-60 Video Head comes unassembled for shipping. After unpacking the Video Head, unscrew and remove the Quick Release Knob, then remove the black metal tube connecting the clamp and the screw. Two hex screws can now be accessed underneath (see picture below).
- Page 2 No tools are needed for operating any of these knobs. Use of tools may cause damage to the Video Head and void the warranty. Do not carry your Tripod and Video Head with a camera/lens attached. Video Heads are designed to work only stationary. WWW.FEISOL.NET © FEISOL INC, USA Page 2 of 3...
- Page 3 For optimal use of the Panning Base Function, turn the Panning Knob (2) only slightly. Opening the Panning Knob too far may cause instability. To allow for precise adjustments, FEISOL Video Heads feature a graduated scale at the bottom of the Panning Base.
Need help?
Do you have a question about the VH-40 and is the answer not in the manual?
Questions and answers