Table of Contents
Advertisement
Maintenance
Use Maintenance tab to maintain the camera especially software reset, upgrade, backup parameters
and restore parameters.
Figure 62. System / Maintenance
Maintenance:
Provides software reset of the camera when troubleshooting.
Restart:
The camera is restarted without changing any of the setting. Use this method if the unit
is not behaving as expected.
Reset:
The unit is restarted and most current settings are reset to factory default values, but the
following settings does not reset.
- The boot protocol (DHCP or static)
- The static IP address
- The default router
- The subnet mask
- The system time
Default:
The Default button should be used with causion. Pressing this returns the camera's
settings to the factory default values including the IP address.
98
Advertisement
Table of Contents
