Table of Contents
Advertisement
Date & Time
Use the Date and Time tab to set the camera's date and time values, manually or automatically.
Figure 16. System / Date & Time
Current Server Time:
Shows the current date and time.
Date:
The default setting is 1970-01-01.
Time:
The default setting is 00:00:00.
New Server Time:
Select the time zone where your camera is located.
Click the "Automatically adjust for daylight saving changes" checkbox to automatically update the
time changes caused by daylight saving.
Time zone:
The default setting is GMT.
Time mode:
The default setting is Set manually.
Synchronize with computer time:
Sets the time according to the clock on your computer.
Synchronize with NTP Server:
This option will obtain the correct time from an NTP server
every 60 minutes. The NTP server's IP address or host name is specified in the time server.
33
Advertisement
Table of Contents
