Xineron HDG-M120 Installation Operation User Manual page 91

Full hd network camera
Table of Contents

Advertisement

Obtain IP address via DHCP:
DHCP server automatically, and then the remaining setting are read-only text.
Use the following IP address:
manually.
IP address:
The address of the camera connected to the network. Specify a unique IP address
for this network camera.
Subnet mask:
The address that determines the IP network that the camera is connected to
(relative to its address). Specify the mask for the subnet the network camera is located on.
Default router:
The router that accesses other networks. Specify the IP address of the default
router (Gateway) used for connecting devices attached to different networks and network segments.
IPv6 Address Configuration:
Other settings for IPv6 are configured in the network router.
DNS Configuration:
IP addresses on your network.
Obtain DNS server via DHCP:
settings provided by the DHCP server automatically, and then the remaining setting are read-only
text.
Use the following DNS server address:
DNS server manually.
Domain name:
Enter the domain to search for the host name used by the network camera.
Primary DNS server:
Secondary DNS server:
Services:
Allows the user to access the camera using web browser encrypted communication.
HTTP port:
The default HTTP (Hypertext Transfer Protocol) port number is 80 and can be
changed to any port within the range 1024-65535.
HTTPS port:
The default port number is 443 and can be changed to any port within the range
1024-65535.
RTSP port:
RTSP (Real Time Streaming Protocol) allows a connecting client to start a video
stream. The default setting is 7070 and can be changed to any port within the range 1024-65535.
Network Traffic:
when connecting the camera to busy or heavily loaded networks. The default setting is Unlimited.
Unlimited:
Provides consistently good image quality at the expense of increased bandwidth and
storage usage during low light.
Select the choice box if you want to assign the IP address from
Select the choice box if you want to assign the IP address
Check this box to enable IPv6 address configuration.
DNS (Domain Name Service) provides the translation of host names to
Select the choice box if you want to use the DNS server
Enter the IP address of the primary DNS server.
Enter the IP address of the secondary DNS server.
Specify the maximum bandwidth of this camera. This is a useful function
Select the choice box if you want to use the desired
91

Advertisement

Table of Contents
loading

Table of Contents