Table of Contents
Advertisement
Event In – Manual Trigger
The Manual Trigger features an alarm out signaling, JPEG file transfer to FTP server, and sends
email to SMTP server whenever operator clicks Manual Trigger button in the Live View window.
Figure 33. Event / Event In – Manual Trigger
Manual Trigger Setting:
trigger.
Dwell time:
The default setting is 60 seconds.
NOTE
Dwell time means how long time the alarm output signal hold on as an output signaling source.
- Click the Save button to save the settings, or click the Reset button to clear all of the information
you entered without saving it.
Click the Enable manual trigger checkbox to enable manual
63
Advertisement
Table of Contents
