Table of Contents
Advertisement
Figure 17. Live View / Source
Default Live View:
Enable cookie:
Click the Enable cookie box if you want to reload the last configuration settings.
Use the followings:
displayed in the live view page.
Source:
Select one of the stream sources to be displayed in the live view page. The default setting
is Stream1.
View size:
Select one of the view sizes to be displayed in the live view page. The default setting
is a 1280x720.
Stream type:
Select one of the stream protocols. The default setting is UDP.
Default TV out:
Mode:
Select the composite video output format. The default setting is NTSC.
Source:
Select one of the composite video output sources. The default setting is stream1.
-- Sequence: If you select Sequence, the composite video output repeats the video
images on a single video pane according to <Sequence Mode Setting>.
<Sequence Mode Setting>
Click the checkbox if you want to assign each stream into Sequence Mode.
Select which formats do you want as default live view source.
Click the Use the following box to configure the video properties to be
Configure the composite video output properties.
35
Advertisement
Table of Contents
