Table of Contents
Advertisement
Brightness:
The image brightness can be adjusted in the range 0-20, where a higher value
produces a brighter image. The default setting is 10.
Sharpness:
Controls the clarity of detail in a scene. The sharpness can be adjusted in the range
0-17. If you set the sharpness value to higher, the image outline becomes sharp. If you set lower
value, the image outline becomes dim. The default setting is 12.
Stabilizer:
The image stabilizer function minimizes the appearance of shaky images caused by
low-frequency vibration. This function is useful for outdoor surveillance. If you set the [Stabilizer] to
ON, the Digital zoom is set to [x1.1] automatically.
D-Effect (Digital-Effect):
-- OFF:
Turn off the digital effect.
-- MIRROR:
-- ROTATE:
-- V-FLIP:
B/W mode (Black/White mode):
-- OFF:
Display the picture with color.
-- ON:
Display the picture with gray scale.
D-Zoom (Digital-Zoom):
1. Select [D-Zoom] to ON and click the Save button. Then D-Zoom OSD windows will be appears
and the Digital zoom is set to [x1.1] automatically.
2. Use [Upper Direction] or [Lower Direction] button to select an option then use [Left Direction] or
[Right Direction] button to select a level.
ZOOM:
--
Use [Left Direction] or [Right Direction] button to enlarge the screen.
PAN:
--
Use [Left Direction] or [Right Direction] button to move the screen (left or right).
TILT:
--
Use [Left Direction] or [Right Direction] button to move the screen (up or down).
User Title:
You can use the camera identification to assign a number and character to the
camera (0 to 9, A to Z, a to z).
Mode:
Select a mode for user title.
-- OFF:
Impossible to enter user title.
-- ON:
Possible to enter user title
Title:
Type a camera title, which can not be enters more than 20 numbers or characters.
Horizontal position:
value produces the user title to more [Right direction] in the screen. The default setting is 0.
Vertical position:
produces the user title to more [Lower direction] in the screen. The default setting is 0.
- Click the Save button to save the settings, or click the Reset button to clear all of the information
you entered without saving it.
You can select the digital effect.
Turn on the mirror effect.
Rotate the picture (180°).
Flip the picture vertically.
You can switch the displayed picture to gray scale or color.
You can select the digital zoom level.
The horizontal position can be adjusted in the range 0-28, where a higher
The vertical position can be adjusted in the range 0-10, where a higher value
30
Advertisement
Table of Contents
