Download Print this page

NEC DT310 Quick Reference Card page 2

Digital telephone nec dt310; dt410; dt710
Hide thumbs

Advertisement

BASIC SETTINGS
To adjust handset volume
Press the Scroll UP / DOWN key in the off-hook status
or during a call.
To adjust speaker volume
Press the Scroll UP / DOWN key during speaker phone
operation, or during a call that is being played on the
speaker.
To adjust ring tone volume
Press the Scroll UP / DOWN key during ringing.
To adjust LCD contrast
Press the Scroll UP / DOWN key when in idle mode to
adjust the LCD contrast.
MAKING CALLS
1. Lift the handset or press the Speaker key to
receive dial tone.
2. Enter the telephone number of the required
party.
CONFERENCE CALLS
1. While on a call, press the CONF soft key.
2. Dial desired number.
3. After call is answered, press the ADD Soft key
4. To begin conference, press the BEGIN soft key
5. Three-way conference is established.
Issue : 1.0 - October 2014
TRANSFERRING CALLS
1. While on a call press the Transfer key.
2. Dial destination telephone, hang up or wait for
answer.
CALL HISTORY
To view information about Outgoing Calls (REDIAL)
and Incoming Calls (CID) on your telephone
1. Press the LIST soft key.
2. Press the REDIAL Soft Key to view Outgoing Calls
or the CID Soft Key to view Incoming Calls
3. Press the UP/DOWN keys to go through the list.
DIRECTORY DIALLING
1. Press DIR Soft Key.
2. Press Soft Key for Directory Dialling type:
ABB = Common Abbreviated Dialling.
EXT. = Co-worker's extension numbers.
STA. = Personal abdials (1-10).
TelBK = Telephone book data.
3. Dial letter/number range for the party you want
to call (e.g., dial 2 for A, B, C or 2).
4. Press the Down Arrow Soft Key to jump to that
section.
5. Press Up or Down Arrow Soft Key to scroll
through the list.
6. Press SPEAKER key or lift handset to place call or
press DIAL soft key
DT310/DT410/DT710 6-Button with LCD Quick Reference Card for SV9100
FUNCTION KEYS
One or more Programmable Keys can be pre-
programmed with a dedicated function or a
telephone number.
Ask your system administrator for more details.
Function
Ask your system administrator for more details.
STANDARD FEATURE CODES
The following list of feature codes might require
additional programming in the Communication Server.
Please contact your system administrator for more details.
9
Outside Number
810
Break In / Executive override
850
Call Back set
850
Start Call Waiting
848
Call Forwarding-All Calls set
8480
Call Forwarding-All Calls cancel
843
Call Forwarding-Busy set
8430
Call Forwarding-Busy cancel
845
Call Forwarding-Don't Answer set
8450
Call Forwarding-Don't Answer cancel
844
Call Forwarding (No answer & Busy) set
8440
Call Forwarding (No answer & Busy) cancel
870
Call Back cancel
847
Do Not Disturb set
8470
Do Not Disturb cancel
841
Message Waiting Lamp Control set
871
Message Waiting Lamp Control cancel
2

Advertisement

loading

  Related Manuals for NEC DT310

This manual is also suitable for:

Dt410Dt710