DVD-S1200
4. Tray
1. Pull the tray out of the mechanism unit. Remove the
gear and install it onto a screwdriver to make a gear jig.
2. Insert the gear jig into the tray open/close hole.
3. Turn the gear jig counterclockwise to open the tray.
4. Remove the tray lid from the tray section.
7
5. Front Panel
1. Remove the connectors.
2. Remove the screws.
3. Remove the tabs.
6. Mechanism Unit
1. Remove the screws.
2. Remove the connectors.
3. Pull out the mechanism unit vertically.