Goodmans CDMP3719PL Instruction Manual

PERSONAL CD/CDMP3
PLAYER WITH FM TUNER
CDMP3719PL
Instruction Manual
SPECIFICATIONS
Earphones output......................................... 15mW±0.2mW
Power requirement...................................... DC 6V external and battery 3V
("AA" Cellx2)
(LR6 or Ni-Cd rechargeable battery)
Dimension................................................... Approx. 153 (W) x 30 (H) x 128 (D)mm
Weight......................................................... 200g not including battery (Main Unit)
For improvement purpose, specification and design are subject to change without
notice.
Goodmans Product Information Helpline 0870 873 0080
IMPORTANT NOTES
1. This product does not contain a separate Power On/Off switch. After inserting a
disc and installing batteries /AC adaptor, simply press the Play button to switch on
and play a disc.
2. In order to maximize battery life and provide optimum playing time this product
incorporates an Auto Power Off function.
The power to the player will automatically switch off approximately 60 seconds
after a disc has finished playing.
3. The ASP function is automatically engaged when playback starts. For more
information, see section 15 of these instructions.
Helpline No: 0870 873 0080
4. If the unit is not to be used for a long
WARNING period of time, make sure that all power
sources are disconnected from the unit.
Remove all batteries from the battery
1. To prevent fire or shock hazard, do not
compartment, and unplug the AC
expose the unit to rain or moisture.
adaptor from the wall outlet. Make it a
practice to remove the AC adaptor by
2. To avoid electrical shock, do not open
grasping the main body and not by
the cabinet. Refer servicing to qualified
pulling the cord.
personnel only.
5. The unit employs a laser. The use of
3. Do not put anything in the safety slot. If
controls or adjustment or performance
you do, the laser diode will be ON when
of procedures other than those
the lid is still open.
specified herein may result in exposure
to hazardous radiation.
LOW BATTERY ALERT
When the " " indicator display in the LCD display, this means that the batteries are
weak. In this case the CD player will not function properly and the batteries must be
replaced.
SAFETY PRECAUTIONS
TABLE OF CONTENTS
Power Sources Normal Batteries /AC adaptor..1 1. As the laser beam used in this compact
Use of Rechargeable Batteries....................2 disc player is harmful to the eyes, do
Earphones Connection................................3
not attempt to disassemble the casing.
Player Maintenance.......................................4
Disc Cleaning and Troubleshooting Guide....5
2. Stop operation immediately if any liquid
Product Specifications..................................6
or solid object should fall into the
cabinet. Unplug the unit and have it
checked by qualified personnel.
Play Operation(see reverse of this sheet)
3. Do not touch the lens or poke at it. If
Basic Disc Play...............................................7
you do, you may damage the lens and
Location of Controls........................................8
the player may not operate properly.
CD Playback ................................................9
MP3-CDs playback ....................................10
4. Do not put anything in the safety slot .
Various Playing Modes ................................11
Repeat and Intro Scan Play Modes..............12 If you do, the laser diode will be ON
Random Play...............................................13 when the lid is still open.
Programmed Track Play...............................14
Digital Anti Shock Operation.......................15
5. If the unit is not to be used for a long
Listening to the Radio ...................................16
period of time, make sure that all power
sources are disconnected from the unit.
Remove all batteries from the battery
compar tment, and unplug the AC
adaptor from the wall outlet. Make it a
practice to remove the AC adaptor by
grasping the main body and not by
pulling the cord.
6. The unit employs a laser. The use of
controls or adjustments or performance
of procedures other than those
specified herein may result in exposure
to hazardous radiation.
1. POWER SOURCES NORMAL BATTERIES/AC ADAPTOR
Battery Power Operation AC Operation
1. Open the battery compartment cover 1. Insert the DC plug at the end of the AC
and insert two "AA" alkaline batteries adaptor cord into the DC input socket
inside the battery compartment. Follow in unit.
the polarity as indicated on the bottom
2. Plug the AC adaptor into a 230V AC
of the cabinet.
power outlet socket.
2. Close the battery compartment cover.
Note: If the AC plug of this unit does not fit
in your AC outlet, a plug adaptor (not
Average Playing
included) should be used.
Battery Type
Time (Continuous Play)
Consult your local dealer on the type of
plug adaptor required.
Alkaline MN
10 Hours(MP3 CD playback)
1500 LR 6 or
9 Hours(Audio CD playback)
Equivalent.
About 8 Hours
Ni-CAD
rechargeable
(min.
specification
recommended
1.2V - 1800mA)
Note: Zinc./Carbon, or Zinc/Chloride type
batteries are not recommended for this unit
as their use will result in extremely short
playing times. Wherever possible and for
economy it is recommended that the mains
adaptor supplied with this unit used.
2. USE OF RECHARGEABLE BATTERIES
Using Rechargeable batteries
1. Rechargeable batteries cannot be charged in this player.
2. A separate charger will be required obtainable from most HiFi stockists.
Nical cadmium and Nical Metal Hydride batteries may be used in this player (not included).
3. If the operating time decreases drastically even when the rechargeable nickel-cadmium
batteries are properly recharged, purchase a new set of rechargeable nickel-cadmium
batteries.
4. When charging for the first time or after a long time, playing time may be reduced. In this
case, charge and discharge the batteries several times.
3. EARPHONES CONNECTION
• Listening with the earphone
Connect the plug of the stereo earphones (included) or headphones (not included) into
the PHONES socket.
Caution: Avoid excessive volume levels and listening to the unit for a long period of time
when using headphone.
TO PHONES
• Adjust Volume to the desired level.
4. PLAYER MAINTENANCE
Cleaning the Cabinet
Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak solution of
neutral detergent and water, and then wipe clean.
Cleaning the Lens
A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not work.
Open the disc cover and clean the lens as follows:
Dust or Dry Particles
Using a camera lens brush/blower, blow on the lens couple times, then wipe it lightly with
the brush to remove dust. Then ,blow on the lens once more.
Finger Prints
If the lens cannot be cleaned by using a brush/blower, use a dry cotton swab starting in the
middle and working to the outside edge.
5.DISC CLEANING AND TROUBLESHOOTING GUIDE
Cleaning the Disc
When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out.
Note:
Do not use solvents such as benzine petrol, thinner, commercially available cleaners or
anti-static spray intended for analogue discs.
Should you experience difficulties in the use of this player please refer to the following
chart before contacting your dealer or the place of purchase.
Troubleshooting Guide
Problem Points to Check
Disc may be inserted upside down
Player fails to function
Disc not mounted correctly on chuck
Dirty or defective disc
Dirty pick up lens
Player lid not closed
Moisture/condensation allow player to warm up to room
temperature for 60 minutes.
AC Power to adaptor switched off
Weak batteries
Auto power off has occurred
No sound from earphones
Earphone plug is not firmly inserted into the PHONES socket
Volume control on the remote is set to zero
No sound when played
Connection is incorrect
through an external amplifier
Power to external amplifier not switched on
Intermittent sound Dirty or defective disc
Dirty pick up lens
Player is subject to excessive vibration
Low battery power
Poor earphone connection
6. PRODUCT SPECIFICATIONS
PICK UP
System Compact disc digital audio system
Laser diode Material: GaAIAs
Properties Wavelength: =780mm
Emission Duration: continuous
Laser output: <44.6µW
Error correction Cross-interleave Reed-solomon code
AUDIO
D/A conversion 1-bit DAC 8 times oversampling
Frequency response 20-20,000Hz (+1/-4 dB)
Anti-shock 35 seconds (CD)/106 seconds (MP3) buffer
No. of channels 2 channels (stereo)
Output level Earphone: 15mW±0.2mW (32 Ohms)
Wow and flutter Below measurable limits
GENERAL
Power requirements -2x " AA" alkaline battery
-DC in socket accepts AC power adaptor.
Power consumption 1.2W( DC 6V) UNDER NORMAL CONDITION
Dimension Approx. 153(W) X 30 (H) x 128 (D) mm
Weight Approx. 200g not including battery (Main Unit)
7. BASIC DISC PLAY
1. Slide the OPEN knob to open the CD
door.
2. Adjust the VOLUME to minimum.
3. Insert the disc with the label side facing
up.
4. Push down in the centre until disc is
locked in place.
5. Close the lid gently until a click is heard.
6. Press the PLAY/PAUSE button to start
playing.
7. To pause playback of the CD, press
the PLAY/PAUSE button . The audio
output is muted. To resume playback
press PLAY/PAUSE button again. To
stop playback, press STOP button
once.
8. To turn power off, depress the STOP
button for a few seconds in STOP
mode.
Remove the disc
Hold the edge and gently press the centre NOTE:
pivot as illustrated. Then pick up the disc. Only compact discs marked with the disc
logo are guaranteed to work on this player.
Home recorded discs (CDR)recorded on
home PC's may not play or operate
correctly.
CAUTION:
Wait for the disc to stop rotating before
sliding the OPEN knob.
NOTE:
This unit can play 3" (8cm) single CD's
without an adaptor. Do not use a CD single
adaptor for these discs.