Setting Up; The Phone - SAGEMCOM D770 User Manual

Setting up...

The phone

Changing the ringing tone
1 Go to the menu Audio
2 You can change the ringing tone of:
• outside calls,
• calls between handsets (intercom).
3 Scroll through the pre-recorded ring tones and confirm with
Modifying the ringing volume
1 Go to the menu Audio
2 Select the sound level and validate with
Enabling/Disabling the silent mode
1 Go to the menu Audio
2 Select the option
The icon appear on the handset screen when the silent mode is active.
You can also activate / deactivate the silent mode by a long press on the
Activate/deactivate beep call *
1 Go to the menu Audio
2 Select the status:
• Beep : When receiving a call, a beep is emitted by the handset.
• Off : No beep is emitted when receiving a call.
3 Confirm with
* ON when silent mode is active.
Enabling/Disabling audio alerts
1 Go to the menu Audio
2 The audio alerts apply to:
• Key Tone: keypad keys pressed,
• Confirm Tone: confirming a menu,
• Low Battery: low battery,
• Out of Range: loss of signal between the base and the handset.
3 Select the desired state,
> Ring Tone Setup
> Ring Tone Setup
> Ring Tone Setup
Off and validate with
> Ring Tone Setup
.
> Signal Tones.
On or Off, and validate with
> External Calls or
> Volume.
.
> Volume.
.
> Silent.
.
Internal Calls.
.
key.
Setting up...
24