The Base; Resetting The Handset; Resetting The Base - SAGEMCOM D770 User Manual

3 Select the handset to unpair from the base and validate with

Resetting the handset

When you reset your handset, all the settings are returned to their initial values (factory settings),
except for the phonebook.
1 Go to the menu Settings
2 Enter the base code and validate with
3 Press to confirm.

The base

Enabling the pairing mode
You enable the pairing mode when you associate an additional handset.
Give a long press on the
The base indicator light flashes *: the base is in pairing mode.
D770A
* only
Your base will remain in pairing mode for about 1 minute.
Changing the default code
1 Go to the menu Settings
2 Enter the current code and validate with
3 Enter the new code and validate with
4 Re-enter the new code and validate with

Resetting the base

When you reset your base, all the settings are returned to their initial values (factory settings),
except for the phonebook.
1 Go to the menu Settings
2 Enter the base code and validate with
3 Press to confirm.
> Handset > Reset
.
key on the base.
> Base > Change PIN.
.
.
.
> Base > Reset Base.
.
.
Handset.
27
Setting up...