Smeg SAP306 Instructions For The User page 19

Instructions for the User
7.1.4 "DEMO" Function
Models with the analogue/digital programmer feature a "DEMO" function which
deactivates the heating elements while leaving the other functions unchanged.
To activate it, simply press and hold
confirmation buzzer will inform the user that the function is active. When the
"DEMO" function is active, the number 6 on the clock flashes at regular intervals.
To deactivate it, simply repeat the same procedure.
7.2 Operation of the electronic analogue clock in pyrolytic
models
7.2.1 Setting the time
When the oven is used for the first time, or after an interruption in the electricity
supply, the display flashes at regular intervals.
Press and, at the same time, hold down the value modification keys
to set the current time. Each individual pressure increases or decreases the time
by one minute. Hold down the value modification keys to increase or decrease
the value more rapidly.
At the end of each completed programming operation, 10 beeps will sound 3
times at intervals of about 1 minute. This sequence can be stopped at any time
by pressing or
.
, and for 6/7 seconds. A
or
21