C A U T I O N
Making Connections
Using PC Cards
To remove a PC Card
Do not remove a PC Card while the OmniBook is reading or writing data.
Otherwise, you could lose data or the OmniBook could stop responding.
When the card is active, the PC Card indicator appears on the status panel.
1. To remove the card, click the PC Card indicator in the taskbar, then click Stop
(for Windows 95 and Windows 98 only). This protects your data and avoids
unexpected problems. You can restart the card by removing it, then inserting
again.
2. Press the eject button once to pop the button out.
3. Press the eject button again to eject the PC Card.
To find tested PC Cards
For the latest information about compatible cards, visit our website at
http://www.hp.com/omnibook and check the Accessories section. Or contact
Hewlett-Packard as described in the Support and Service booklet.
4-18