To Remove A Ram Expansion Module - HP OmniBook 7100 Reference Manual
Hide thumbs
Also See for OmniBook 7100:
- Reference manual (146 pages) ,
- Service manual (87 pages) ,
- User manual (53 pages)
Table of Contents
Advertisement
Expanding the OmniBook
Installing a RAM Expansion Module
To remove a RAM expansion module
Your OmniBook's computer chips are extremely static-sensitive. Static electricity can
permanently damage computer chips. Before starting, reading the caution on
page 5-6 about how to handle RAM expansion modules.
1. From the Start menu, shut down the OmniBook.
2. Unplug the ac adapter, if present, and remove the battery. (Remove a second
battery if one is installed.)
3. Turn the unit bottom side up and pry open the RAM cover.
4. Release the two metal latches at the sides of the RAM board, so the free edge of
the board pops up.
5. Pull the module out of the connector.
6. Replace the door.
7. Insert the battery.
5-8
Advertisement
Table of Contents
