HP OmniBook 7100 Reference Manual page 19

Main Menu
Language
BIOS Revision
System Time
System Date
Floppy Drive
Internal Hard Disk
Quiet Boot
Video Display Device
Video Expansion
Television Type
Primary Video Adapter
System Memory
Extended Memory
Configuring the OmniBook with the BIOS Setup Utility
Sets the language for this utility and for BIOS
messages.
Shows the current BIOS version.
Sets the time using 24-hour format. Values
set take effect immediately.
Sets the date using dd/mm/yy format (except
English, which is mm/dd/yy format).
Sets the floppy drive type.
Sets the hard disk drive type and various
parameters.
When enabled, hides summary of
power-on self-test and messages during boot.
Sets whether the built-in display
automatically switches to an external display
if one is detected.
When enabled, the video image covers the
entire display in lower resolution modes
(SVGA, VGA). When disabled, the video image
is centered in the display.
Sets the format (NTSC or PAL) for video
output.
Sets whether the internal (built-in) video
adapter automatically switches to an external
video adapter connected to the docking
system, if one is detected.
Shows the system memory size.
Shows the extended memory size.
Introducing the OmniBook
Default
English
Detected
automatically.
Floppy disk drive
type detected and
set automatically.
Hard disk drive
detected and set
automatically.
Enabled
Auto
Disabled
NTSC
Auto
640KB
Detected
automatically.
1-11