Notes On Installation And Operation; Other Important Information; Tools, Materials And Equipment; Disposal - Buderus Logano G234X Installation And Service Instructions Manual

2.3

Notes on installation and operation

When installing and operating the heating system, observe and comply
with the following:
• The local building codes regarding the installation.
• The local building regulations regarding air supply and venting
systems and the chimney flue connection.
• Regulations governing power connection to the power supply.
• The technical regulations of the gas utility company regarding the
connection of the gas burner to the local main gas supply.
• The regulations and standards relating to the safety systems for hot-
water heating systems.
2.3.1

Other important information

• The installation of a boiler must be notified to and approved by the
relevant gas supply company.
• Operate the boiler only with the balanced flue system (LAS)
specifically designed and approved for this boiler type.
• Regional approvals for the flue gas system may be required.
2.4

Tools, materials and equipment

For the installation and maintenance of the boiler, you will need the
standard tools used for central heating, gas and water systems plus a set
of metric wrenches and Allen wrenches.
The following assembly aids will also be useful:
• Pipes for transport
• Wood battens
• Cleaning brushes and/or chemical cleaning agent for wet cleaning
2.5

Disposal

▶ Dispose of the boiler packaging material in an environmentally
responsible fashion.
▶ Dispose of any components of the heating system that require
replacement in an environmentally responsible fashion at an
approved landfill.
Notice regarding environmental protection and disposal  Section 8,
page 24.
2.6

Product Description

The boiler is a low-temperature gas boiler with an atmospheric gas
burner.
The boiler is fully functional with the factory-installed
TM
AquaSmart .
The boiler consists of the following main components ( Fig. 1):
• Ignition module and adjustable boiler temperature controller
• Boiler casing and front cover
• Boiler block with insulation
• Burners
The ignition module and adjustable boiler temperature controller
monitor and control all electrical and operational components of the
boiler.
The boiler casing prevents energy loss and acts as soundproofing.
The boiler block transfers the heat generated by the burner to the boiler
water. The insulation reduces energy loss.
Logano G234X – 6 720 811 233 (2014/05)
6
Fig. 1 Main components G234X
TM
[1] AquaSmart
[2] Ignition control
[3] Boiler block with insulation
[4] Boiler jacket
[5] Burners
[6] Front cover of boiler
2.7

Scope of delivery

▶ Check packaging upon receipt of delivery for damage.
▶ Check delivery for completeness.
The boiler is supplied in one packing unit with the mounted boiler casing,
gas burner and gas valve, and technical documentation.
Component
Boiler
• 90°-elbow (¾ " NPT)
• Safety valve
• Drain valve (¾ ")
Vent damper
Technical documentation
Table 2 Scope of delivery
The following accessories are optionally available from Buderus:
• CH Pump
• Cleaning brush
2
Product Description
1
2
3
4
5
6 720 806 028-01.1T
Qty. Packaging method
1 Pallets/box
1 Box
1 Box
1 Foil package
5