Table of Contents
Advertisement
CHAPTER 5: CARE & MAINTENANCE
CARE & MAINTENANCE:
It is important to perform the minor maintenance tasks described in this section. Failure to maintain the bike as described
here could void the TRUE Fitness Warranty. To reduce the risk of electrical shock, always unplug the unit from its power
source before cleaning or performing any maintenance tasks.
Inspection:
TRUE Fitness is not responsible for performing or scheduling regular maintenance or inspections.
Users should inspect the bike daily. Look and listen for slipping belts, loose fasteners, unusual noises, worn or frayed
power cords, and any other indications that the equipment may be in need of service. If any of these are noticed, obtain
service. Do not attempt to use the bike until proper service has been performed or damaged parts have been replaced.
Important:
If you determine that the bike needs service, make sure that the bike cannot be used inadvertently. Turn the unit off, and
then unplug the power cord from its power source. Make sure other users know that the bike needs service.
To order parts or to contact a TRUE Authorized Service representative, please visit www.truefitness.com.
CLEANING THE EQUIPMENT:
After Each Use:
Use GymWipes™ Antibacterial wipes or spray a solution of 30 parts water to 1 part mild detergent to dampen a soft cloth
and wipe all exposed surfaces.
Use a LCD/screen cleaner or spray a solution of 1 part 91% isopropyl alcohol and 1 part water to dampen a soft cloth and
wipe the surface of the console. This helps remove fingerprints, dust, and dirt.
Weekly:
Vacuum any dust or dirt that might have accumulated under or around the bike or any cover vents.
*Clogged air vents can prevent adequate cooling, causing a shortened life.
CAUTION:
Do not use any acidic cleaners. Doing so will weaken the paint or powder coatings and may void the TRUE Fitness
Warranty. Never pour water or spray liquids on any part of the bike. Allow the bike to dry completely before using.
Frequently vacuum the floor underneath the unit to prevent the accumulation of dust and dirt, which can affect the
smooth operation of the unit.
LUBRICATION:
Remove the pedals from the crank quarterly and lubricate the threads that attach the pedals to the cranks to prevent
corrosion.
Note: The user's left side pedal is reverse threaded.
Truefitness.com / 800.426.6570 / 636.272.7100
90
Hide quick links:
Advertisement
Table of Contents
