Table of Contents
Advertisement
CHAPTER 2: ASSEMBLY INSTRUCTIONS
BIKE ASSEMBLY STEPS (continued):
Step #9 Console Mounting:
•
At least one person should hold the Console while the
remaining Console mounting steps are completed
Step #10 Grounding wire Connections :
•
Remove Electronics Board ground wire screw (image, left)
•
Re-attach both the Electronics Board ground wire and the
Console ground wire to the Front Mast Mounting Plate
using the same ground screw (image, above)
Truefitness.com / 800.426.6570 / 636.272.7100
•
The fasteners used to attach the Console are
provided in the Console packaging
•
Align the back of the Console with the Front
Mast Console Mounting Plate
•
Attach the Console to the Mounting Plate
by tightening all 4 screw with a Phillips head
screwdriver (not provided)
16
Hide quick links:
Advertisement
Table of Contents
