Freezer; Ice Maker - GE PFE28 Owner's Manual And Installation Instructions

Ge bottom freezer refrigerator owner's manual and installation instructions
Table of Contents

Advertisement

Available languages

Available languages

About the automatic
ice maker.
A newly installed refrigerator
may take 12 to 24 hours to begin making ice.
Automatic Ice Maker*
Ice
maker
The ice maker will produce seven cubes
per cycle approximately
100-130 cubes
in a 24-hour period, depending on freezer
compartment
temperature,
room temperature,
number of door openings and other use
conditions,
The ice maker will fill with water when it cools to
Feeler Arm
15°F (-10°C), A newly installed refrigerator may
take 12 to 24 hours to begin making ice cubes,
If the refrigerator is operated before the water
line connection is made to the unit or if the
water supply to an operating refrigerator is
turned off, make sure that the ice maker is
turned off, Once the water has been connected
to the refrigerator, the ice maker may be turned
on, See the table below for details,
You may hear a buzzing sound each time
the ice maker fills with water,
Throw away the first few batches of ice to allow
the water line to clear,
Be sure nothing interferes with the sweep
of the feeler arm,
When the bin fills to the level of the feeler arm,
the ice maker will stop producing ice, It is normal
for several cubes to be joined together,
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink,
NOTE: In homes with lower-than-average
water
pressure, you may hear the ice maker cycle
multiple times when making one batch of ice,
To minimize the risk of personal injury, avoid contact with the moving parts of the ejector
mechanism, or with the heating element that releases the cubes. Do not place fingers or
hands on the automatic
ice making mechanism while the refrigerator is plugged in.
How to Turn the Ice Maker
On/Off
Control Style A
Control Style B
Use the settings
menu on the touchscreen
Use the "ICE MAKER" button on the control
PFE28, PYE22P
GFE28/26, DFE28,
GYE22
GNE29, PWE23
Control Style C
Use the "ICE MAKER" button on the control
Ice Box
Lift and pull
Ice Bucket
and Dispenser*
. Open the ice box door on inside of the left
door,
. Pull up and out on on the ice bucket in
the left hand door to remove it from
the
compartment,
. To replace the ice bucket, set it on the
guide brackets
and push until the ice
bucket seats properly,
. If bucket cannot
be replaced, rotate the ice
bucket fork 1/4 turn clockwise,
18
Extra Ice Storage*
There is additional
ice storage in the freezer
compartment
drawer,
. Open the freezer drawer,
. The ice bucket is located on the left side of
the upper basket,
. Pull the upper basket forward
to remove
the ice bucket,
Freezer
Ice
Bucket
i
i!
i!
*Select Models
Only

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents