Sony STR-DA3300ES Operating Instructions Manual page 47

Parameter Explanation
Full Flat Makes the measurement of
frequency from each
speaker tlat.
Engineer Sets the frequency to one
that matches that of the
Sony listening room
standard.
Front Reference Adjusts the characteristics
of all the speakers to match
the characteri,tics of the
front speaker.
OFF Sets the auto calibration EQ
to ofr.
5
Press
8.
The exit screen appears.
Notes
• DTS 96/24 signals arc played back as 48 kHz
signals if the frequency response measurement
result is utilited .
• The frequency response measurement result is not
utilited in the following cases.
The multi-channel input is selected.
- "2ch Analog Direct" is being used.
- Input signals of which the sampling frequency is
more than 96 kHz are being received.
Tip
The size of a speaker (LARGE/SMALL) is
determined by the low characteristics. The
measurement results may vary. depending on the
position of the optimi/er microphone and speakers,
and the shape of the room. It is recommended that
you follow the measurement results. Howe\,er, you
can change those settings in the Speaker settings
menu. Save the measurement results first. then try to
change the settings if you want.
47
GB
•
::J
CO
en
-
I II
... -
( 1)
Co