Settings For The System (System Settings Menu) - Sony STR-DA3300ES Operating Instructions Manual

Multi channel av receiver
Hide thumbs Also See for STR-DA3300ES:
Table of Contents

Advertisement

connected to the receiver. The multi-channel
sound can be played back as it is.
Note
Audio signals are not output from the TV's
speakers when HOMI Audio is set to "AMP."
• HDMI SW Level
Lets you set the level of the sub woofer to 0 dB
or + 10 dB when peM signals are input via an
HOMI connection. You can set the level for
each HOMI input independently.
• 0 dB
• AUTO
Autolnatically sets the level to 0 dB or
+
10
dB depending on the frequency.
• +10 dB
GB
Settings for the system
(System settings menu)
You can use the System settings menu to
customize the settings of the receiver. Select
"System" in the Settings menus. For details on
adjusting the parameters, see "7: Operating the
receiver using the GUI (Graphical User
Interface)" (page 38).
• Screen Saver
Lets you activate the screen saver function for
the GUI menu on the TV connected to the
receiver.
• ON
When there has been no operation attempted
for 15 minutes, the screen saver function is
activated automatically.
• OFF
The screen saver function is disabled.
• RS-232C Control
Lets you use this menu for the zone 2
operatons. For details, see "Option menu
parameter of zone
2
operations" (page
104)
in
"Listening to the sound in another zone
(ZONE 2 operations)".
• ON
Page 58

Advertisement

Table of Contents
loading

Table of Contents