Sony STR-DA3300ES Operating Instructions Manual page 32

This receiver is equipped with a function for
converting video signals. You can output the
video signal after connecting this receiver via
the MONITOR VIDEO OUT jack as shown in
the illustration.
• Video signals can be output as HDMI video
and component video signals.
• Component video signals can be output as
HDMI video and video signals.
For details on the video converting function,
see "In the video input/output conversion table
classified by the menu settings" (page 34).
In the video input/output conversion table of the receiver
Input Signals
Output Signals
oee
~
HDMIOUT
COMPONENT VIDEO
MONITOR VIDEO OUT
INPUT jack
MONITOR OUT
HDMI IN 1/2/3
0
6. X X
VIDEO IN
4)
0 0
0/6.*
COMPONENT
0
0/6. 0
VIDEO IN
e
o :
Video signals are converted and output through the video converter.
6. :
The same type of signal as that of the input signal is output. Video signals are not converted.
X : Video signals are not output.
:1:
Video signals are output when "Resolution" is set to "DIRECT" in the Video settings menu.
32 GB