LockUP Employee Lock User Manual page 6

Required Components
LockUp Lock Parts
Note: Confirm that all lock parts are present. If there are damaged or missing parts contact your
LockUp Product Support Specialist.
1-Front Unit
Required Tools
For lock installation
3/8" Socket
(deep socket required)
Warning: Do not use an electric screw gun during installation of the
lock unless equipped with a torque adjuster, which must be set on a
low torque setting. Otherwise, damage may be caused to the lock.
1-Rear Unit
Phillips Screwdriver
Head Size #1 & #2
3
2-Locking Nuts
For padlock hasp removal
Hack Saw
Optional-Back Plate
Metal File