LockUP Employee Lock User Manual page 13

Door Prep - Padlock Hasp Removal
Required Tools: Hack Saw and Metal File.
Box Locker Padlock Hasp
Mark Here
With the locker door closed, mark
the appropriate area (as indicated
above) to remove the padlock hasp.
The cut-line needs to clear the front
face of the locker door.
Recessed Cup with Single Point Latch
Mark Here
With the locker door closed, mark
the appropriate area (as indicated
above) to remove the padlock hasp.
The cut-line needs to clear the front
face of the locker door.
Note:
LockUp manufactures an optional Back Plate
to cover the padlock hasp hole.
For more information please contact your
LockUp Product Specialist.
With the locker door open, use the
hand-held grinder or the hack saw to
cut the protruding part of the padlock
hasp as demonstrated above.
With the locker door open, use the
hand-held grinder or the hack saw to
cut the protruding part of the padlock
hasp as demonstrated above.
10
Smooth out any rough or sharp edges
with a metal file. With the locker door
closed, inspect the locker to ensure
that nothing is protruding above the
face of the locker door.
Smooth out any rough or sharp edges
with a metal file. With the locker door
closed, inspect the locker to ensure
that nothing is protruding above the
face of the locker door.