Nailing Brackets - Travis Industries 1924 Illuminations Owner's Manual

Nailing Brackets

•
Nailing brackets are provided on the exterior of the fireplace to secure the fireplace to the framing
(see Figure 4). If using ½" facing (i.e.: drywall), use the standoff closest to the face of the fireplace
(see Figure 4 item "a"). If using 7/8" to 1" facing, use the other standoff (see Figure 4 item "b").
NOTE: Make sure the fireplace is square before securing the nailing brackets. The fireplace face
should measure an equal distance corner to corner. Use shims, if necessary, to insure
proper alignment.
NOTE Keep the front and back panel in place while installing. This will help insure the fireplace is
square.
a
1/2" Facing
b
7/8" to 1" Facing
© Travis Industries
Installation
(for qualified installers only)
TOP VIEW
Fireplace
TOP VIEW
Fireplace
4090216
Framing
Nailing Bracket
Drywall
Framing
Nailing Bracket
Drywall
Tile
7/8"
Figure 4
100-01216_000
9