Viewing And Changing Settings - Lenovo ThinkServer TS130 User Manual

Table 25. Items under the Startup menu (continued)
Item
Keyboardless Operation
Option Keys Display
Option Keys Display Style
Startup Device Menu Prompt
Note: [ ] indicates the default setting.
Table 26. Items under the Exit menu
Save Changes and Exit
Discard Changes and Exit
Load Optimal Defaults

Viewing and changing settings

The Setup Utility program menu lists various items about the system configuration. To view or change
settings, start the Setup Utility program. See "Starting the Setup Utility program" on page 55. Then, follow
the instructions on the screen.
You can use either the keyboard or the mouse to navigate through BIOS menu choices. The keys used to
perform various tasks are displayed at the bottom of each screen.
68
ThinkServer TS130 User Guide
Enabled / [Disabled]
[Enabled] / Disabled
[Normal] / Legacy
[Enabled] / Disabled
Item
Option
Enable or disable the keyboardless
operation. This function enables
the system to function without a
keyboard. It is commonly used when
the system has been set up as a
network server.
Note: If it is enabled, systems without
keyboards will not display keyboard
errors during the POST.
Enable or disable the Option Keys
Display function. When this function
is enabled, the system software
option key (such as the F1 key)
prompts will be displayed.
Note: Disabling the prompts will not
affect the function of a specific key.
Control the prompts displayed on the
POST logo screen.
• Normal: During the POST, this
• Legacy: During the POST, this
Enable or disable the Startup Device
Menu Prompt. This function enables
the Startup Device Menu to be
displayed by pressing F12 after the
server is turned on. The Startup
Device Menu enables the sequence
of startup devices to be temporarily
changed.
Exit the Setup Utility program after saving the changes.
Exit the Setup Utility program without saving any changes.
Restore/Load default values for all the setup options.
Description
message will be displayed: To
interrupt normal startup, press
Enter.
message will be displayed: Press
F1 to enter Setup and press F12 to
display Boot Menu.
Description