Setting The Bottom Feed Dog At Its Neutral Position - Pfaff 1163 Adjustment Manual

13

Setting the bottom feed dog at its neutral position

.04.02
Requirement
With the stitch length set at "0", cranks 1 and 3 should be in alignment, and there should be
no feeding motion of the bottom feed dog when the balance wheel is turned.
Fig. 13 - 02
Raise the presser foot and set the stitch length at "0".
Adjust crank 1 (screw 2) in accordance with the requirement.
Adjustment
3
76-026
1
2
13 - 3