Setting The Feed Dog At Its Neutral Position - Pfaff 9083-2/99 Instruction Manual

Adjustment
11

Setting the feed dog at its neutral position

.05.03
11 - 5
Requirement
With the stitch length set at "0, cranks 1 and 3 should be in alignment, and there should be
no feeding motion of the feed dog when the balance wheel is turned.
Fig. 11 - 04
Cancel the stitch condensation limit, see Chapter 11.05.13 Stitch condensation.
Raise the presser foot and set the stitch length at "0".
Adjust crank 1 (screw 2) in accordance with the requirement.
Set the stitch condensation limit as described in Chapter 11.05.13 Stitch condensation.
3
1
2