Bottom Feed Dog Position - Pfaff 1163 Adjustment Manual

13

Bottom feed dog position

.04.04
Requirement
When the stitch length is set at "0" and the bottom feed dog 5 is at t.d.c., it should
1. Be positioned in the centre of the needle plate cutout in the feeding direction.
2. Its teeth should be 0.75 – 0.85 mm parallel over the needle plate.
Fig. 13 - 04
Shift or turn crank 1 (screw 2) in accordance with requirement 1.
Turn crank 3 (screw 4) in accordance with requirement 2.
3
5
76-054
Adjustment
4
2
1
13 - 5