Table of Contents
Advertisement
upgrade the new firmware for this print server, and
enable/disable wireless function.
Port Name is the name of the printer port. Each printer
port has to be assigned a name. The client utility uses this
name to access the printer port.
Upgrade Firmware: You can use this "Upgrade
Firmware" tool to update the newest firmware of the print
server. Click "
your PC. After selecting the firmware file, click the
"Upgrade" button to finish the firmware update process. If
you want to reset the Print Server to default factory settings,
please click "Load Default".
Wireless Function: You can select "Enable" or
"Disable" to manually enable or disable the wireless
function. If you manually enable wireless function, the
print server's wireless LAN will be always enabled and
Ethernet will be always disabled. If you manually disable
the wireless function, the print server's wireless LAN will
be always disabled and Ethernet will be always enabled.
You also can select "Auto" to let the print server
automatically decide to enable or disable the wireless
function. The print server only can work in ether Ethernet
or wireless LAN mode. It cannot work in both Ethernet and
wireless LAN mode at the same time. When the print server
starts up, it will auto-detect if the LAN port is connected to
an active network by an Ethernet cable. If the print server
is connected to an active network by Ethernet cable when
starting up, the print server will run in Ethernet mode. If
the print server is not connected to an active network by
Ethernet cable when starting up, the print server will run in
" button and select the correct firmware in
85
Hide quick links:
Advertisement
Table of Contents
