Operation
PA (Public
PA (Public Address)
Address)
Note
Speaker should have 8-ohm
impedance and be rated to
handle at least 4 watts.
Note
The speaker should be directed
away from the microphone to
prevent acoustic feedback.
1
Connect an external PA speaker to the PA jack
on the rear panel.
Note
Act i v i ty on the CB channel will
be heard through the PA spe a ke r.
Adjust volume co n t rol for nor-
mal listening leve l .
2
Set
24
CB/PA switch to PA position.
3
Push and hold microphone button and speak
in a normal voice. Your voice will now transmit
on the PA speaker.
4
Adjust PA speaker volume with the
Dynamike control.
Operation
25