Installation; Mounting And Connection - Cobra GR 29 LTD ST Operating Instructions Manual

Installation

Location Location
Plan location of transceiver and microphone
bracket before starting the installation.
Select a location that is convenient for operation,
yet does not inte rfe re with the dri ver or passenger.
The transceiver is usually mounted to the under-
side of the dash with the microphone bracket
beside it.
Mounting and

Mounting and Connection

Connection
Hold the radio with the mounting bracket in
1
the exact desired location. If there is no inter-
Note ference, remove the bracket and use it as a
template to mark the location for the mount-
The transceiver is held in the
ing screws.
universal mounting bracket by
two thumbscrews which allow
for adjustment at a convenient
angle.
The bracket includes two self-
tapping screws and star wash-
ers.The mounting must be
mechanically strong and conve-
niently located.
2 Drill the holes and secure the bracket.
2
cb transceiver
3 Connect the antenna cable plug to the recep-
tacle marked "ANT" on the back of the unit.
Installation
continued
3