Advertisement
4. A chime will sound within 3 seconds to
indicate that the vehicle has entered
remote PAIRING MODE.
5. Within 30 seconds of the chime, press any button
on all remotes to be paired including previously
paired remotes. A chime will sound after each
remote is paired.
6. Turn ignition to OFF and remove key.
7. Test all remotes.
15
NOTE: Ensure any existing remotes are present when
pairing to vehicle.
1. Close all doors and then open driver's door and
press the UNLOCK button on driver's door panel
while door is open and insert key in ignition.
2. Turn ignition from OFF to RUN 8 times within 10
seconds with the 8th time ending in RUN. Door
MODE.
3. Within 20 seconds press any button
4.
5. Within 20 seconds, press any button on second
pairing.
6. Turn ignition to OFF. Locks will again cycle to
indicate end of PAIRING MODE.
7. Test all remotes.
16
NOTE: Ensure any existing remotes are present when
pairing to vehicle.
1. Fasten seat belts and close all doors.
2. Turn ignition from OFF to RUN 4 times within 6
seconds, with the 4th time ending in RUN (OFF is
the position where you can remove your key, RUN
is the position just shy of starting your car).
3. Turn ignition to OFF. Acoustic signal will sound to
PAIRING MODE.
4. Within 10 seconds, press and hold any button
PAIRING
release button on remote.
5. Wait 2 seconds but within 10 seconds repeat
Step #4 for all other remotes. If you only have one
remote then continue to Step #5.
6. Turn ignition to RUN or wait 10 seconds to end
PAIRING MODE.
7. Test all remotes.
NOTE: Ensure any existing remotes are present when
pairing to vehicle.
1. Turn ignition from OFF to RUN 8 times within
10 seconds, with the 8th time ending in RUN.
MODE.
2.
3. Within 20 seconds, press any button on the
PAIRING
second remote. Door locks will cycle again to
4. Turn ignition to OFF. Locks will again cycle to
indicate end of PAIRING MODE.
5. Test all remotes.
NOTE: Ensure any existing remotes are present when
pairing to vehicle.
1. Turn ignition from OFF to RUN 4 times within 3
seconds, with the 4th time ending in RUN. Door
2.
3. If applicable, within 20 seconds press any button
on the second remote. Door locks will cycle to
4. Turn ignition to OFF. Door locks will cycle to
indicate end of PAIRING MODE.
5. Test all remotes.
17
PAIRING
18
PAIRING MODE.
31
Advertisement
