Table of Contents
Advertisement
User Manual – Sound generation parameters
HI
Range: -12...0...+12 dB
NRPN MSB=8 NRPN LSB=6
Data Entry MSB Range: 52...64...76
Gain (positive values) or attenuation (negative
values) of signals with frequencies around 6,3 KHz.
PARAMETRIC
A parametric equalizer is composed of three sections.
Two similar sections are used to boost/dampen the
extreme frequency bands, that is, low band (Low S.) and
high band (Hi S.). A third band (BW) can be assigned a
middle
frequency
range.
boosting/dampening and bandwidth can all be set
manually.
Signal
Level
Freq.
BW
LOW SHELF
Range: -12...0...+12 dB
NRPN MSB=3 NRPN LSB=02
Data Entry MSB Range: 52...64...76
Gain (positive values) or attenuation (negative
values) of signals with frequencies below 180 Hz.
FREQUENCY
Range: 300...4800 Hz
NRPN MSB=3 NRPN LSB=03
Data Entry MSB Range: 0...127
Set the reference frequency controlled by the
parameter.
BANDWIDTH
Range: 0,50....3
NRPN MSB=3 NRPN LSB=04
Data Entry MSB Range: 0...127
Bandwidth of the middle filter, that is, the extension
of frequencies on both sides of the FREQUENCY,
that are controlled by the GAIN parameter.
GAIN
Range: -12...0...+12 dB
NRPN MSB=3 NRPN LSB=05
Data Entry MSB Range: 52...64...76
Gain (positive values) or attenuation (negative
values) of signals with frequencies around the the
one set through the FREQUENCY parameter
HI SHELF
Range: -12...0...+12 dB
NRPN MSB=3 NRPN LSB=06
Data Entry MSB Range: 52...64...76
Gain (positive values) or attenuation (negative
values) of signals with frequencies above 6,3 KHz.
Reference
frequency,
Frequency
Gain
.
EN - 22
Advertisement
Table of Contents
