User Manual – Sound generation parameters
Signal
Level
Signal
Level
Increasing
Resonance
Signal
Level
FILTER TYPE
Range:
LP: low-pass filter, passes low-frequency signals and attenuates signals with frequencies higher than the cutoff
frequency.
BP: band-pass filter, attenuates all frequencies outside a certain range (band); the centre of this range is the cutoff
frequency.
HP: high-pass filter, passes high-frequency signals and attenuates signals with frequencies lower thatn the cutoff
frequency.
NRPN MSB=3 NRPN LSB=06
Data Entry MSB Range: 0...2
Select the type of filter.
Signal
Level
SPEED (WITH TYPE=AUTO)
Range: Slow, Fast
NRPN MSB=3 NRPN LSB=7
Data Entry MSB Range: 0, 1
Sets the speed at which the filter moves while in
Auto mode.
SENSITIVITY (WITH TYPE=TOUCH)
Range: 0...127
NRPN MSB=3 NRPN LSB=8
Data Entry MSB Range: 0...127
Adjust the filter's sensibility to dynamic (the pressure
of fingers on the keys).
FOOT CONTROL (WITH TYPE=PEDAL)
Range: 0...127
NRPN MSB=3 NRPN LSB=9
Data Entry MSB Range: 0...127
CutOff
Frequency
Frequency
CutOff
Frequency
Frequency
CutOff
Frequency
Frequency
LP
Signal
Level
CutOff
Frequency
Frequency
Signal
Level
CutOff
Frequency
Frequency
Signal
Level
CutOff
Frequency
Frequency
Signal
Level
CutOff
Frequency
Frequency
BP
Signal
Level
CutOff
Frequency
Frequency
Assign this function to an expression pedal, to shift
the filter in real time.
LEVEL
Range: 0...127
NRPN MSB=3 NRPN LSB=08
Data Entry MSB Range: 0...127
Sets the output signal level.
EN - 18
Signal
Level
CutOff
Frequency
Signal
Level
CutOff
Frequency
Signal
Level
CutOff
Frequency
HP
CutOff
Frequency
Frequency
Frequency
Frequency
Frequency