Table of Contents
Advertisement
FILTER ATTACK:
takes to reach the maximum cutoff frequency. The higher
the value, the longer the attack time.
FILTER DECAY:
the time a filter takes to move from the
maximum cutoff frequency to the level set by the Filter
Cutoff parameter. The higher the value, the longer the
decay time.
FILTER CUTOFF:
regulates the sound's brightness. The higher the value,
the higher the frequency.
FILTER RESONANCE:
increased level of the frequencies close to the cutoff frequency. The
higher the value, the louder are these frequencies.
HIVELOCITY GLIDE:
with a high dynamic on the keyboard. The higher the value, the stronger
the
glissato
effect.
PERCUSSION DECAY:
percussion. The higher the value, the longer the decay time.
PERCUSSION LEVEL:
The higher the value, the higher the level.
PRESENCE:
sound presence; it simulates the dynamic of wind
instruments. The higher the value, the stronger and richer the sound.
RELEASE DETUNE:
value, the stronger the detuning.
RELEASE TIME:
time it takes for the sound to decay, after a key has been released. The higher the value, the longer
the decay time.
RELEASE NOISE:
guitar) when a key is released. The higher the value, the louder the release noise.
STRETCHING TUNE:
frequency distribution known as Railsback curve. In this way, low-pitched notes are slightly lower, while high-pitched
ones are slightly higher. The higher the value, the stronger the deviation.
SUSTAIN LEVEL:
pressing the key and end when the key is released. The higher the value, the higher the sustain signal.
SWEEP DEPTH:
modulation depth of the cutoff frequency of the brightness filter. The higher the value, the deeper
the modulation.
SWEEP RATE:
regluates the modulation speed of cutoff frequency of the brightness filter. The higher the value, the
faster the modulation.
VELOCITY FILTER:
of the brightness filter. The higher the value, the more sensitive the keyboard.
VEL. PERCUSSION:
percussion noise on electromagnetic organ Sounds. The higher the value, the more sensitive the keyboard.
VELOCITY SENS.:
higher the value, the more sensitive the keyboard.
VIBRATO DEPTH:
VIBRATO RATE:
modulation speed of the
filter attack time; that is the time it
Filter's Cutoff frequency, which
filter's resonance curve, which determines an
amount of
glissato
when playing instruments
decay time of an electromagnetic organ's
percussion level of electromagnetic organs.
magnitude of tuning variation (to lower pitch) after a key has been released. The higher the
loudness of the hammer's noise (or finger's, in string instruments such as bass, double bass,
deviation from ideal tuning (corresponding to the equal temperament), according to a
signal level during the Sustain phase of the sound. The sustain phase begins shortly after
controls the influence of the dynamic, i.e. the pressure on the keyboard, on the cutoff frequency
controls the influence of the dynamic, i.e. the pressure on the keyboard, on the volume of the
controls the influence of the dynamic, i.e. the pressure on the keyboard, on the volume. The
modulation depth of the
vibrato
vibrato
User Manual – Sound generation parameters
CutOff
Frequency
Filter
Filter
Note On
Attack
Decay
Signal
Level
effect. The higher the value, the greater the modulation.
effect. The higher the value, the faster the modulation.
EN - 13
Note Off
Filter
CutOff
Filter
Filter
Res. = 0
Res. = 64
Res. = 127
Filter
CutOff
Time
Frequency
Filter
Advertisement
Table of Contents
