Precautions When Using The Touch Screen - LG 42LT55A Owner's Manual

62
USING THE TOUCH SCREEN

Precautions When Using the Touch Screen

CAUTION
The monitor is optimized for indoor use.
y
The touch screen monitor is optimized for Windows 7.
y
Do not remove the USB cable when using the touch screen monitor.
y
Use LG TDS (Touch Display Settings) provided with the monitor to set touch coordinates when
y
rotating the monitor connected to a Windows XP computer.
The LG TDS provided with the monitor only supports the following graphic cards: nVidia, AMD (ATI)
y
and Intel.
If touch does not respond, remove the USB cable and connect it back in ten seconds.
y
Touch responds when the monitor is powered on.
y
Up to 10 touch-points are supported when the monitor is connected to a Windows 7 computer; one
y
when connected to a Windows XP computer.
Set the monitor as the primary monitor in Windows XP.
y
Touch accuracy is optimized by using full screen mode.
y
Your action may not work properly on the edge area of the touch screen.
y
If the 10 touch-points are not detected, restart your PC. (Windows 7)
y
The touch operation (e.g. touches count, gesture, etc.) may vary depending on the content.
y
The spot that you try to touch and the one which is actually touched on the screen may differ
y
depending on the angle you view the monitor screen.