Entertainment; Using The Network; Connecting To A Wired Network - LG 42LT55A Owner's Manual

24

ENTERTAINMENT

ENTERTAINMENT

Using the Network

Connecting to a Wired Network

Connect the display to a local area network (LAN)
via the LAN port as shown in the following illustra-
tion and set up the network settings.
Only supports wired network connection.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
For detail information, contact your internet pro-
vider or router manual.
Internet
CAUTION
Do not connect a modular phone cable to the
y
LAN port.
Since there are various connection meth-
y
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
To set up the network seetings: (Even if your dis-
play has already connected automatically, running
setup again will not harm anything),
1
Press MENU to access the main menus.
2
Press the navigation buttons to scroll to
WORK and press OK.
3
Press the navigation buttons to select
Setting and press OK.
4
If you already set network setting, select
Resetting. The new connection settings resets
the current network settings.
5
Select IP Auto Setting
- If selecting IP Manual
Navigation and Number buttons. IP address-
es will need to be input manually.
- IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area net-
work (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you're using a broadband router or broad-
band modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be deter-
mined.
6
When you are finished, press EXIT.
CAUTION
Network setting menu will not be available
y
until the display is connected to physical
network.
Since there are various connection meth-
y
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
NET-
Network
or IP Manual Setting.
Setting, press the