Mounting On A Wall - LG 42LT55A Owner's Manual

Mounting on a Wall

For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation instructions are available from your
dealer, see the optional Tilt Wall Mounting Bracket
Installation and Setup Guide.
10 cm
10 cm
10 cm
If you intend to mount the monitor to a wall, attach
wall mounting interface (optional parts) to the back
of the set.
When you install the monitor using the wall
mounting interface (optional parts), attach it
carefully so it will not fall.
1
Please, Use the screw and wall mount interface
in accordance with VESA Standards.
2
If you use screw longer than standard, the
monitor might be damaged internally.
3
If you use the wrong screw, the product might
be damaged and drop from mounted position.
In this case, LG Electronics is not responsible
for it.
4
VESA compatible only with respect to screw
mounting interface dimensions and mounting
screw specifications.
5
Please use VESA standard as below.
785mm or greater
y
* Fastening screw: Diameter 6.0 mm x
Pitch 1.0 mm x Length 10 mm
CAUTION
Disconnect the power before installing or
y
moving the monitor. Otherwise electric shock
may occur.
If you install the monitor on a ceiling or
y
slanted wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
y
cause damage to the monitor and void your
warranty.
Use screws and wall mounts that meet the
y
VESA standard. Any damages or injuries by
misuse or using an improper accessory are
10 cm
not covered by the warranty.
10 cm
To prevent injury, this apparatus must be
y
securely attached to the wall in accordance
with the instrallation instructions. (This only
pertains to Australia and New Zealand.)
NOTE
Use screws that are listed on the VESA
y
standard screw specifications.
The wall mount kit includes an installation
y
manual and necessary parts.
The wall mount bracket is optional. You can
y
obtain additional accessories from your local
dealer.
The length of screws may differ depending
y
on the wall mount. Be sure to use the proper
length.
For more information, refer to the instructions
y
supplied with the wall mount.
ASSEMBLING AND PREPARING
11