Table of Contents
Advertisement
PIP/PBP
Displays videos or photos stored in the USB device
on a single monitor by dividing it into the main and
sub screens.
Mode
*PIP (Picture In Picture): Displays the subscreen
in the main screen.
*PBP (Picture By Picture): Displays the subscreen
next to the main screen.
Sub
Main
screen
screen
PIP
Position
Adjusts the position of the subscreen (top left,
bottom left, top right, bottom right)
top left
bottom left
Size
Adjusts the size of the subscreen (Size 0-10).
10 : 960x540
PIP
0 :
480x270
< 1920x1080 >
PBP
top right
bottom right
PBP
960x1080
CUSTOMIZING SETTINGS
NOTE
The subscreen is only supported when using the
y
USB device.
AV
Component
Main
RGB
HDMI/ DVI-D/ DP
You can change only the size and position in PIP
y
mode.
With PBP selected, the Aspect Ratio option in the
y
PICTURE menu is disabled (Fixed as 16:9).
While running the PIP/PBP function, the Tile Mode
y
function does not work.
You must select the output sound before running
y
the PIP or PBP functions. (Select either Main or
Sub.)
If you fail to select Main or Sub from the sound
y
selection box, and if the OSD disappears after
either a period of time or when the Exit or Back
key is pressed, the PIP/PBP subscreen is not
activated.
You cannot change the sound while running the
y
PIP or PBP functions. If you want to change the
sound, please restart PIP/PBP.
The picture quality of the subscreen is set
y
according to the values selected in the main menu,
not the USB device.
Even when the power is turned off or on, if the
y
USB device is connected, the PIP/PBP mode plays
again from where it left off.
If you play videos you selected in PIP/PBP mode,
y
the videos will play back repeately in succession.
The buttons below work in PIP mode.
y
Button
Photo
51
Sub
USB
X
O
O
O
Movie
Advertisement
Table of Contents
