LG 42LT55A Owner's Manual page 48

48
CUSTOMIZING SETTINGS
Setting
Factory Reset Select this option to return to the default factory settings.
Set ID You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 255) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
Tile Mode Tile Mode
Auto Config.
PC Position
PC Size
Natural
Reset
y
y
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB/DVI Cable and
distributor.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1 to 15 r = 1 to 15)
- 15 x 15 available.
- Configuration of an integration screen is also available as well as
configuration of one by one Display.
Adjusts the screen position automatically.
The displayed image may be unstable for a few seconds while the configuration
is in progress.
Moving the screen position horizontally and vertically.
Adjust the horizontal and
of the bezel.
The image is omitted by the distance between the screens to be naturally
shown.
Function to initialize and release a tile.
All Tile setting are released when selecting tile recall and the screen returns to
full screen.
NOTE
If Tile Mode is enabled, Smart Energy Saving will be disabled to provide the same picture
quality as other displays.
The touch screen feature is limited while using Tile Mode.
Description
vertical size of the screen taking into account the size