Table of Contents
Advertisement
To block all channels at once:
Highlight
Block All in step 5 on previous page and then
highlight
Done and press @.
To unblock all locked channels at once:
Highlight
Allow All in step 5 on previous page and then
highlight
Done and press @.
Unlocking programs temporarily
If you try to tune the TV to a program that exceeds the rating
limits you set, the TV will enter program lock mode and the
following message will appear on-screen:
ThiS program exceeds the rating limit you set.
Push 'mute' to enter PIN.
You can either temporarily unlock the program or select an
unlocked program to watch.
To temporarily unlock the program:
1
Press
M'f/'
2
Enter your four-digit PIN code and press @. If the correct
code is entered, the program lock mode is released and the
normal picture appears. All locking is disabled until the
TV is turned off, and will be enabled when the TV is
turned on again.
Using the input lock feature
You can use the Input Lock feature to lock the video inputs
(Built-In DVD, VIDEO 1, VIDEO 2, ColorStream HD-1,
ColorStream HD-2, HDMI 1, HDMI 2, HDMI 3 and PC)
and channels
3
and 4. You will not be able to view the input
sources or channels until you unlock the inputs.
To lock/unlock the video inputs:
1
Press M~U and highlight the
Locks menu icon.
2
Press T to display the PIN code entering screen.
3
Enter your four-digit PIN code and press @.
4
Press
T to highlight Input Lock and press ~.
5
Press ... or T to select the level of video input locking you
prefer, as described below.
Video: Locks Built-In OVO, VIDEO 1, VIDEO 2,
ColorStream H01/H02, HOMI 1, HOMI 2, HOMI 3, and
Pc.
Video+: Locks Built-In OVO, VIDEO 1, VIDEO 2,
ColorStream H01/H02, HOMI 1, HOMI 2, HOMI 3, PC
and channels 3 and 4.
• Select
Video+ if you have a device such as a VCR
connected to the ANT input.
Off:
Unlocks all video inputs and channels
3
and 4.
6
Press@.
53
I
Advertisement
Table of Contents
