Selecting The Color Temperature; Using Cableclear® Digital Noise Reduction - Toshiba REGZA 26LV47 Owner's Manual

Selecting the color temperature
You can change the quality of the picture by selecting from
three preset color temperatures (Cool, Medium, and Warm), as
described below.
Using CableClear® digital noise reduction
The CableClear® digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
To select the color temperature:
5
In the
Color Temperature
field, press .... or ~ to select
the mode you prefer
(Cool, Medium,
or
Warm).
3
In the
CableClear
field, press .... or
~
to select your
desired setting.
To change the CableClear settings:
1
Press
M~U
and open the
Video
menu.
2
Highlight
Noise Reduction
and press @.
neutral
reddish
blueish
Medium
Warm
Cool
1
Press
M~U
and open the
Video
menu.
2
Highlight
Picture Settings
and press @.
3
Highlight
Advanced Picture Settings
and press @.
4
Highlight
Color Temperature
and press @.
6
Press. or • to select either B
Drive
or G
Drive,
and
then press .... or
~
to adjust the settings.
~tI,"~
_
~!I"----_.
• B Drive:
~
makes the picture blueish.
• G Drive:
~
makes the picture greenish.
Note: The B Drive and G Drive settings are connected to
the Color Temperature settings and will change based
on which setting is selected in step
5
above.
7
To save the new settings, highlight
Done
and press @.
To revert to the factory defaults, highlight
Reset
and
press@.
Note: If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the color
temperature mode, the picture mode automatically
changes to Preference.
Note:
• If the current input
is
ANT, VIDEO 1,
or
VIDEO 2, the
menu will display the text "CableClear. " The available
selections are Off, Auto, Low, Middle, and High.
• If the current input is ColorStream HD1, ColorStream
HD2, HDMI1, HDMI2,
or
HDMI3 the menu will display
the text "ONR. " The available selections are Off, Auto,
Low, Middle, and High. Auto will react proportionally
to the strength of the noise. Low, Middle, and High will
reduce the noise in varying degrees, from lowest to
highest, respectively.
4
To save the new settings, highlight
Done
and press @.
To revert to the factory defaults, highlight
Reset
and
press@.
I
58