Table of Contents
Advertisement
Selecting the picture mode·
Adjusting the picture
Contrast
Back Light*
darker
DynaLight**
On/Off
Brightness
darker
lighter
Color
paler
deeper
Tint
reddish
greenish
Sharpness
softer
sharper
You can adjust the picture quality (Contrast, Back Light,
DynaLight™, Brightness, Color, Tint, and Sharpness) to your
personal preferences.
Adjusting the picture quality
Your personal preferences
Lower contrast for darkened room (factory
setting)
Bright and dynamic picture (factory setting)
Standard picture settings (factory setting)
Movie
Preference
Standard
Sports
You can select your desired picture settings from four different
modes, as described below.
To select the picture mode:
Press
PIC
~ODE
on the remote control.
The following popup menu appears on-screen.
Press A or ... to select the picture mode you prefer and
press@.
To select the picture mode using the menu system:
1
Press M~U and open the Video menu.
2
Highlight Mode and press
@.
*
Back Light
This feature adjusts the brightness of the entire screen. When in
video mode and no signal is input, this will automatically be set to
o.
(Settings are stored in memory.)
**
DynaLight
This function automatically strengthens the black coloring of dark
areas in the video according to the level of darkness.
To adjust the picture quality:
1
Press M~U and open the Video menu.
2
Highlight Picture Settings and press @.
3
Press A or'" to select the picture quality you want to
adjust (Contrast, Back Light, DynaLight,
Brightness, Color, Tint,
or
Sharpness), and then
press .... or
~
to adjust the setting, as described in the table
above.
3
Press A or ... to select the picture mode you prefer and
press@.
Note: The picture mode you select affects the current
input only You can select
a
different picture mode for
each input.
4
To save the new settings, highlight Done and press @.
You can use any of the picture modes
(~
"Selecting the
picture mode," above left) as a starting point for adjusting
the picture settings.
To revert back to the base mode that you began adjusting
the picture settings from, highlight Reset and press @.
The picture qualities you adjusted are automatically saved in
the Preference mode
(~
"Selecting the picture mode,"
above left) until Reset is selected.
45 I
Advertisement
Table of Contents
