Table of Contents
Advertisement
10.2. SETTINGS
The Settings menu is divided into two rows of icons. The top row icons are used for the control of the UTI-INV
module (mode, equitherm regulation, HDW etc.), the bottom row icons are used to set the UTI-IQCP control panel
(language, time, network connection etc.).
Setting options:
Control (ON/OFF, Cooling/Heating, Summer/Winter)
Parameters setting (temperature sensors, operation limits, equitherm regulation etc.)
Reduction timer
Temperature sensors
Device information
Current time and date
10.2.1 Basic control
The control screen allows the setting of the device’s main modes. The icons on the left show the current status.
There are three basic parameters:
On / Off - Turns the device on or off. In the ON state, all set programmes are running. In the OFF state, the divice does not
perform any action. It is possible that after swiching the device off, the circulation pump might still be running for a
while.
Heating / Cooling - In the heating mode, the device heats according to the heating curve, and heats the domestic hot
water. In the cooling mode, the device cools the water at a preset temperature, the HDW heating is not activated.
Summer / Winter - Choosing the season. In summer mode, the device only heats the HDW tank. In winter mode, all
heating operations are performed.
ON/OFF
Mode setting
Season setting
Language
Network setting
Sound setting
Backlight
Back
9
UTI-INV module
settings
UTI-IQCP control panel
settings
Back to the main screen
Status icons:
The device is OFF
The device is ON
The device is Cooling mode
The device is Heating mode
The device is Winter mode
The device is Summer mode
Advertisement
Table of Contents
