Table of Contents
Advertisement
10.2.3 Temperature
List of other temperature sensors that are not shown on the main screen. The exchanger temperature and the
required temperature are displayed. The E, F and G sensors are displyed - these values are only informative and do
not affect the regulation.
Exchanger temperature
Other sensors
10.2.4 Reduction timer
For each day of the week, you can select up to four time intervals during which the reductution timer is active.
Move between the days of the week using the arrow buttons. To set the time, click on the corresponding box and
insert the value using the arrow buttons.
Set time intervals
Time interval is not set
Edited value
10.2.5 Device information
Information sheet showing the current version of the control panel, type of the outdoor unit and other
information, including the MAC address of the device (if you are incorporating the panel to the network). The last
line shows if the SD card is inserted.
Moving between days of the week:
Setting the time intervals:
11
Required water
temperature according
to the equitherm curve
Back to Settings
Moving up and down
between days
Back to the Settings
Changing the time
10 minutes up/down
Save and return to
the Settings menu
Back to the Settings
Advertisement
Table of Contents
