Impromat Klima ATW-MINI Technical Manual page 15

The settings menu is divided into two rows of icons. The top row icons are used for the control of the UTI-INV
module (mode, equitherm regulation, HDW etc.), the bottom row icons are used to set the UTI-IQCP control panel
(language, time, network connection etc.).
Setting options:
Control (ON/OFF, Cooling/Heating, Summer/Winter)
Parameters setting (temperature sensors, operation limits, equitherm regulation etc.)
Reduction timer
Temperature sensors
Device information
Current time and date
Password setting
You can change your password through the web interface. If you forget your password, it is possible to revert the
panel to the factory settings, which will also reset your password. Username cannot be changed.
Printscreen
If you for some reason need to create a screenshot of the touch panel (to send to your service organization, for
example), you can access it from: http:// your IP address /screen.bmp
Data
The data from the SD card can be saved to your computer - you can analyze them or send to your service
organization.
By clicking on a specific day, you can open or save the particular record. To open the *.ICH file, it is necessary to
have the IMPROMAT service kit installed.
Language
Network setting
Password settign
Data
15
UTI-INV module
settings
UTI-IQCP control panel
settings
Back to the main screen